Casio YC-430 User Manual page 30

Setting Up the Multi PJ Camera System
7.
Replace the document on the document stage with the next one you want to project.
The currently projected image is replaced by the new image.
Current document camera image
A copy of each image you project is stored automatically in a folder on your computer's hard
disk, where it remains until you quit PJ Camera Software. This makes it possible to scroll
back and re-display a previous image in your presentation, without re-recording that image.
8.
To scroll back to a previous image, move the mouse pointer to the top center of your
computer screen.
This will cause the PJ Camera Software operation bar to appear.
9.
On the operation bar, select [Back] on the [View] menu.
This displays the full-resolution recorded version of the previously projected image.
10.
This completes the Multi PJ Camera System test.
To quit PJ Camera Software, display the operation bar and then select [Exit] on the [File]
menu.
This exits PJ Camera Software and automatically turns off the PJ Camera.
Pressing the [
Camera without quitting PJ Camera Software.
See the PJ Camera Software User's Guide for other operations you can perform with PJ
Camera Software.
E-30
] (power) button in step 10 of the above procedure will turn off the PJ
New document camera image