Formatting a Memory Card
Before you can use a memory card with your camera, you must format it.
Formatting a memory card that already has snapshots or other files on it, will delete its
contents. Normally you do not need to format a memory card again. However, if storing to a
card has slowed down or if you notice any other abnormality, re-format the card.
Be sure to perform the following procedure on the camera to format the memory card.
Press [ON/OFF] to turn on the camera.
Use [ ] and [ ] to select the "Set Up" tab.
Use [ ] to select "Format" and then press [ ].
Press [ ] to select "Format"
and then press [SET].
To cancel formatting, select
"Cancel" and then press
Wait until the "Busy... Please
wait..." message disappears
from the monitor screen
before doing anything else.
"Set Up" Tab
PJ Camera Overview