Related Manuals for Safehold WAS01
Summary of Contents for Safehold WAS01
- Page 1 Anchor Sling Instruction Manual Note: For Declaration of Conformity See Page 14 Read and understand instructions before using this equipment Do not throw instructions away Designed in the UK SHUM-073 Iss 01...
- Page 2 Contents Limitations, About & Warning Description Using the Anchor Compatibility 13 14 Service Log Inspection Table Declaration Labelling Conformity...
- Page 3 Inspection Maintenance, Appropiate Applications & Servicing & Standards Storage Notes...
- Page 4 This manual covers all variants language of the country in which within the SafeHold Anchor sling the product is to be used. range. If there is reason to doubt your fitness to safely absorb the shock...
- Page 5 DESCRIPTION Anchor sling Anchor sling Anchor sling Anchor sling 0.5m 1.0m 1.5m 2.0m Material Polyester webbing EN795:2012 Type B Standards PD CEN/TS16415:2013 Type B Max. user 140kg including clothes and equipment weight Lanyard 0.1kg 0.2kg 0.3kg 0.3kg weight Length 0.5m 1.0m 1.5m 2.0m...
- Page 6 USING THE ANCHOR All anchorages should be above At no point should the Anchor Sling head height, choose the highest be slack, or tensioned in any other possible alternative without direction. compromising free movement The Anchor Sling should not about the work area. extend the working length of the Ensure that the Anchor Sling is not device in any configuration.
- Page 7 Capacity: Anchorage Connectors The Anchor is designed for use SafeHold equipment is designed by one person with combined for use with SafeHold approved weight (person, clothing, tools, components subsystems etc.) of up to 140kg / 310 lbs. for all only. Non-approved components applications.
- Page 8 CCQS Certification into UK law and amended, and the Services Limited, Block following standards. Blanchardstown Corporate Park, Safehold Anchor range Ballycoolin Road, Blanchardstown, has been designed to meet the Dublin 15 D15 AKK1, Ireland requirements of EN795:2012 as a (NB2834).
- Page 9 Age and fitness combinations may interfere with seriously affect a worker's ability the operation of this equipment. to withstand falls. Pregnant women Use caution when using this or minors must not use SafeHold equipment around moving fall protection products. Failure to machinery,...
- Page 10 Disposal: Dispose of the Anchor sling if it has Before disposing of the Anchor been subjected to fall arrest forces sling, cut the webbing in multiple or inspection reveals an unsafe or places to eliminate the possibility defective condition. of inadvertent reuse. MAINTENANCE, SERVICING &...
- Page 11 Labelling: See below for a typical anchor sling label. All labels on the anchor sling must be present and fully legible. Label No. 40003 (Rev.1) ANTAGE ANCHOR www.safe-hold.com Designed in the UK Made in China EWL: 0.5m 2834 DO NOT REMOVE LABELS...
-
Page 12: Service Log
SERVICE LOG Safehold LTD www.safe-hold.com Model #: User: Date of first use: Serial No: Date of manufacture: Pass Fail Date Results/Condition: Inspected by: Next Inspection Date:... - Page 13 Competent Component Inspection: User Person Ensure webbing is free from cuts, abrasion, wear and tears Check the weave of the Webbing webbing for distortion resulting from loading. Melted webbing or any other signs of either heat or chemical exposure Sewing / Any loose / damaged / thread uneven threads...
-
Page 14: Eu Declaration Of Conformity
EU DECLARATION OF CONFORMITY This declaration of conformity is issued under the sole responsibility of the manufacturer: SAFEHOLD LTD: 1-3 Eaves Court Bonham Drive, Sittingbourne, ME10 3RY. compliance@safe-hold.com +44 (0) 1795 668862 Model No. WAS01 Product Description Model No. Cert No. -
Page 15: User Notes
USER NOTES... - Page 16 www.safe-hold.com...
Need help?
Do you have a question about the WAS01 and is the answer not in the manual?
Questions and answers