1. Manuals
  2. Brands
  3. Safehold Manuals
  4. Safety Equipment
  5. ADVANTAGE
  6. Instruction manual

Safehold ADVANTAGE Instruction Manual

Waist belt, shoulder & leg pad
Hide thumbs Also See for ADVANTAGE:

Advertisement

Table of Contents

Waist belt,
shoulder & leg pad
Instruction Manual
SAFERAIL
Patent Pending
Note: For Declaration of Conformity See Page 19
Read and understand instructions before using this equipment
Do not throw instructions away
Designed in the UK
1
SHUM-091 Iss 01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADVANTAGE and is the answer not in the manual?

Questions and answers

Related Manuals for Safehold ADVANTAGE

Summary of Contents for Safehold ADVANTAGE

  • Page 1 Waist belt, shoulder & leg pad Instruction Manual SAFERAIL Patent Pending Note: For Declaration of Conformity See Page 19 Read and understand instructions before using this equipment Do not throw instructions away Designed in the UK SHUM-091 Iss 01...
  • Page 2 Contents About & Warning Description Donning General use Waist belt Connections & Use & Applications & Inspection operation Standards Notes Inspection table Declaration of conformity...
  • Page 3 Installing Leg Pads Installing Limitations & Shoulder Pads compatibility Service Disposal, Labels Maintenance, Servicing & Storage...
  • Page 4 This manual covers full maintenance, periodic Safehold waist belt range including examination and for repair in the the connection to a compatible fall language of the country in which arrest harness and the attachment the product is to be used.

  • Page 5: General Use

    If in doubt, fall, deterioration or unusual wear contact Safehold Ltd. for advice. should be destroyed and removed from service immediately. All authorised users must reference...
  • Page 6 DESCRIPTION Waist Belt Shoulder Pads Leg Pads Airtex foam, Cordura, polyester webbing, EDC coated Material steel Standards EN358:2018 Max. user 140kg including clothes and equipment weight Belt weight 900g 100g 50g per pad Waist Belt Shoulder Pad Leg Pads...
  • Page 7 DONNING THE WAIST BELT Step 1 To Fasten the waist belt Unfasten waist buckle quick connectors. Don waist belt as you would a belt. Insert the end of the buckle to the adjuster. Fasten and pull free webbing until waist belt is adjusted securely.
  • Page 8 the harness front torso strap Waist belt installation (optional): (just below the fold). Un-thread the webbing on the Feed the back strap webbing waist belt. into webbing guides Align the waist belt with the (mounted onto the rail of the back straps of the harness waist belt) and re-thread the waist belt...
  • Page 9 Fold over the bottom retaining Shoulder pad installation flaps and fasten the two Undo the zip and the popper popper buttons. buttons on the shoulder pad. Zip up the shoulder pad. Feed the harness shoulder webbing into the shoulder pad and ensure the D ring is in the position shown.
  • Page 10 As per EN360:2002, Anchorage Connectors self-locking snap hooks SafeHold equipment is designed carabiners required. for use with Safehold approved anchorage to which the SRL/ components subsystems RTFA attaches must meet the only. Non-approved components requirements of EN362:2004. or subsystems may jeopardize the...

  • Page 11: Correct Connection

    CORRECT CONNECTION INSPECTION Waist belt shall be inspected by list appropriate inspection the authorised person before each intervals and procedures. use. The competent person should The inspection shall be conducted keep a log of their inspection in by a competent person other than the "Inspection and Maintenance the user.
  • Page 12 STANDARDS The EU type-examination (Module into UK law and amended, and the B) and conformity assessment following harmonized standards. procedure (Module were The Safehold harness range has conducted CCQS Certification Services Limited, Block been designed to meet the Blanchardstown Corporate Park,...
  • Page 13 ONLY use approved Safehold anchorage point, thus increasing runners on the Saferail (Universal fall clearance required to safely Rail System) and do NOT exceed arrest the user.
  • Page 14 disposing of the waist belt, cut Disposal: the webbing in multiple places Dispose of the waist belt if it has or otherwise disable the waist been subjected to fall arrest forces belt to eliminate the possibility of or inspection reveals an unsafe inadvertent reuse.
  • Page 15 Labelling: See below for the a typical waist belt label. All labels on the wasit belt must be present and fully legible. User must inspect the waist belt prior to each use. A competent person must complete a professional and formal inspection and initial below at least once every 12 months.

  • Page 16: Service Log

    SERVICE LOG Safehold LTD www.safe-hold.com Model #: User: Date of first use: Serial No: Date of manufacture: Pass Fail Date Results/Condition: Inspected by: Next Inspection Date:...
  • Page 17 NOTES:...
  • Page 18 Component Inspection: User Competent Person Ensure webbing is free from cuts and abrasion, wear and tears Check webbing under buckles for rubbing and deterioration. Webbing Check the weave of the webbing for distortion resulting from loading. Melted webbing or any other signs of either heat or chemical exposure Verify all impact indicators are...

  • Page 19: Eu Declaration Of Conformity

    EU DECLARATION OF CONFORMITY This declaration of conformity is issued under the sole responsibility of the manufacturer: SAFEHOLD LTD: 1-3 Eaves Court Bonham Drive, Sittingbourne, ME10 3RY. compliance@safe-hold.com compliance@safe-hold.com +44 (0) 3330152552 CCQS Certification Services Limited Module B & D is carried by Model No.
  • Page 20 www.safe-hold.com...

Table of Contents