Related Manuals for Banner TL70 Pro
Summary of Contents for Banner TL70 Pro
- Page 1 TL70 Pro Ethernet Modular Tower Light Instruction Manual Original Instructions p/n: 241121 Rev. B 31-Oct-24 © Banner Engineering Corp. All rights reserved.
-
Page 2: Table Of Contents
Industry Canada ICES-003(A)..................................33 Dimensions ........................................34 Chapter 6 Accessories Cordsets ........................................35 Mounting Brackets....................................... 36 Elevated Mount System....................................37 LMB Sealed Right Angle Bracket ................................38 Chapter 7 Banner Engineering Corp Limited Warranty............. 39 © Banner Engineering Corp. All rights reserved. -
Page 3: Chapter 1 Features
Chapter 1 Features Banner's TL70 Pro Ethernet Modular Tower Light is a 70 mm, modular LED indicator with bright and uniform light. The modularity gives the user flexibility to customize tower lights as needed and change positions in the field. The TL70 is also available preassembled for easy installation. -
Page 4: Chapter 2 Installation Instructions
TL70 Pro Ethernet Modular Tower Light Instruction Manual Chapter Contents Assembling the Modules ...................................... 4 Chapter 2 Installation Instructions Assembling the Modules To assemble the modules: Align the notches on each module and press together. Rotate the top module clockwise to lock into place (notches shown in the locked position). -
Page 5: Chapter Contents
TL70 Pro Ethernet Modular Tower Light Instruction Manual Chapter Contents Chapter 3 Wiring Wiring for Power over Ethernet (PoE) Models Pinout Connection (802.3af mode A, mixed DC and data) 475 mm (18.7 in) cable with 4-pin D-Code M12 Female Quick-Disconnect TX+ / DC- Connector RX+ / DC+... -
Page 6: Chapter 4 Configuration Instructions
Chapter 4 Configuration Instructions Modbus TCP and EtherNet/IP Configuration By default, the TL70 Pro Ethernet Tower Light is configured to communicate via Modbus TCP or EtherNet/IP without the need to connect the device to a computer for setup. Plug the tower light into a switch, and use the default IP address of 192.168.0.1 and subnet mask of 255.255.255.0 to connect via Modbus TCP or EtherNet/IP. -
Page 7: Changing The Ip Address
Configuration Instructions TL70 Pro Ethernet Modular Tower Light Instruction Manual Get Configuration Changing the IP Address To change the IP address: Select Settings. Select Ethernet. Enter the desired IP address and subnet. Choose either Static or DHCP from the drop-down menu. -
Page 8: Save And Upload The Configuration File
TL70 Pro Ethernet Modular Tower Light Instruction Manual Configuration Instructions Save and Upload the Configuration File After making any changes to the configuration, you must save the configuration files to your computer, then upload it to the device. Changes to the XML file are not automatically saved. Save your configuration file before exiting the tool and before sending the XML file to the device to avoid losing data. If you select DXM › Send XML Configuration to DXM before saving the ... - Page 9 Configuration Instructions TL70 Pro Ethernet Modular Tower Light Instruction Manual Continued from page 8 Alternate - Basic Mode PLC Address EIP Outputs EIP Output Options Alternate - Basic Mode Options 0 = Green 1 = Red 2 = Orange 3 = Amber 4 = Yellow 5 = Lime Green...
- Page 10 TL70 Pro Ethernet Modular Tower Light Instruction Manual Configuration Instructions Continued from page 9 Alternate - Basic Mode PLC Address EIP Outputs EIP Output Options Alternate - Basic Mode Options Segment 3 Color 1 Segment 3 Color 2 Segment 3 Color 1 Intensity...
- Page 11 Configuration Instructions TL70 Pro Ethernet Modular Tower Light Instruction Manual Continued from page 10 Alternate - Basic Mode PLC Address EIP Outputs EIP Output Options Alternate - Basic Mode Options Subnet_2 Subnet Byte 2 Subnet_3 Subnet Byte 3 Subnet_4 Subnet Byte 4...
- Page 12 TL70 Pro Ethernet Modular Tower Light Instruction Manual Configuration Instructions Continued from page 11 Alternate - Basic Mode PLC Address EIP Outputs EIP Output Options Alternate - Basic Mode Options 0 = Green 1 = Red 2 = Orange 3 = Amber 4 = Yellow 5 = Lime Green...
- Page 13 Configuration Instructions TL70 Pro Ethernet Modular Tower Light Instruction Manual Continued from page 12 Alternate - Basic Mode PLC Address EIP Outputs EIP Output Options Alternate - Basic Mode Options 0 = Slow 1 = Medium Segment 1 Basic Speed 2 = Fast...
- Page 14 TL70 Pro Ethernet Modular Tower Light Instruction Manual Configuration Instructions Continued from page 13 Alternate - Basic Mode PLC Address EIP Outputs EIP Output Options Alternate - Basic Mode Options Segment 5 Basic Intensity 2 Segment 5 Basic Speed Segment 5 Basic Pattern 0 = Off Basic Audible Type 1 = Tone...
-
Page 15: Modbus Tcp Register Map
Configuration Instructions TL70 Pro Ethernet Modular Tower Light Instruction Manual Continued from page 14 PLC Address Description Data Range Notes Product Name_14 0…65535 Product Name_15 0…65535 Product Name_16 0…65535 Item H 0…65535 Item L 0…65535 Serial Number 1 (H) 0…65535 Serial Number 2 0…65535... - Page 16 TL70 Pro Ethernet Modular Tower Light Instruction Manual Configuration Instructions Continued from page 15 Name Register With Offset Description Holding Register Representation Access Address 1 - 254 Reserved 1 = Soft Reset, 2 = Hard Reset (with Factory Reset comms)
- Page 17 Configuration Instructions TL70 Pro Ethernet Modular Tower Light Instruction Manual Continued from page 16 Name Register With Offset Description Holding Register Representation Access 0 = Off 1 = Steady 2 = Flash 3 = Two Color Flash 5000 5001 Segment 1 Animation 4 = 50/50 5 = 50/50 Rotate...
- Page 18 TL70 Pro Ethernet Modular Tower Light Instruction Manual Configuration Instructions Continued from page 17 Name Register With Offset Description Holding Register Representation Access 0 = High 1 = Medium 5003 5004 Segment 1 Color 1 Intensity 2 = Low 3 = Off...
- Page 19 Configuration Instructions TL70 Pro Ethernet Modular Tower Light Instruction Manual Continued from page 18 Name Register With Offset Description Holding Register Representation Access 5030 5031 Segment 5 Color 2 5031 5032 Segment 5 Color 1 Intensity 5032 5033 Segment 5 Color 2 Intensity...
- Page 20 TL70 Pro Ethernet Modular Tower Light Instruction Manual Configuration Instructions Continued from page 19 Name Register With Offset Description Holding Register Representation Access 0 = Off 1 = Steady 2 = Flash 3 = Two Color Flash 5112 5113 Basic Animation 4 = 50/50 5 = 50/50 Rotate...
- Page 21 Configuration Instructions TL70 Pro Ethernet Modular Tower Light Instruction Manual Continued from page 20 Name Register With Offset Description Holding Register Representation Access 0 = High 1 = Medium 5115 5116 Basic Intensity 1 2 = Low 3 = Off 4 = Custom...
-
Page 22: Profinet Configuration
TL70 Pro Ethernet Modular Tower Light Instruction Manual Configuration Instructions Continued from page 21 Name Register With Offset Description Holding Register Representation Access 5145 5146 Basic Intensity 1 5146 5147 Basic Intensity 2 5147 5148 Basic Speed 5148 5149 Basic Pattern 5150... -
Page 23: Profinet Map
Configuration Instructions TL70 Pro Ethernet Modular Tower Light Instruction Manual Enabling PROFINET When complete, select File › Save, and then select to send the PROFINET-enabled Send Configuration to DXM configuration to the tower light. The tower light can now be connected over PROFINET. PROFINET Map Slot Name Profinet Byte # Local Registers Description Holding Register Representation... - Page 24 TL70 Pro Ethernet Modular Tower Light Instruction Manual Configuration Instructions Continued from page 23 Slot Name Profinet Byte # Local Registers Description Holding Register Representation 0 = Off 1 = Basic On 5001 Segment 1 State 2 = Basic Flash...
- Page 25 Configuration Instructions TL70 Pro Ethernet Modular Tower Light Instruction Manual Continued from page 24 Slot Name Profinet Byte # Local Registers Description Holding Register Representation 0 = Green 1 = Red 2 = Orange 3 = Amber 4 = Yellow 5 = Lime Green...
- Page 26 TL70 Pro Ethernet Modular Tower Light Instruction Manual Configuration Instructions Continued from page 25 Slot Name Profinet Byte # Local Registers Description Holding Register Representation 0 = Slow 1 = Medium 10-11 5006 Segment 1 Speed 2 = Fast 3 = Custom...
- Page 27 Configuration Instructions TL70 Pro Ethernet Modular Tower Light Instruction Manual Continued from page 26 Slot Name Profinet Byte # Local Registers Description Holding Register Representation 0 = Off 1 = Low 72-73 5037 Audible Volume 2 = Medium 3 = High...
- Page 28 TL70 Pro Ethernet Modular Tower Light Instruction Manual Configuration Instructions Continued from page 27 Slot Name Profinet Byte # Local Registers Description Holding Register Representation 0 = Green 1 = Red 2 = Orange 3 = Amber 4 = Yellow 5 = Lime Green...
- Page 29 Configuration Instructions TL70 Pro Ethernet Modular Tower Light Instruction Manual Continued from page 28 Slot Name Profinet Byte # Local Registers Description Holding Register Representation 0 = Slow 1 = Medium 234-235 5118 Basic Speed 2 = Fast 3 = Custom...
-
Page 30: Tower Light Segment Modes
TL70 Pro Ethernet Modular Tower Light Instruction Manual Configuration Instructions Continued from page 29 Slot Name Profinet Byte # Local Registers Description Holding Register Representation 312-313 5157 Basic Intensity 2 314-315 5158 Basic Speed 316-317 5159 Basic Pattern 0 = Off 320-321 5161 Audible Type... - Page 31 Configuration Instructions TL70 Pro Ethernet Modular Tower Light Instruction Manual Continued from page 30 Setting Description Audible Tone Defines the audible tone frequency 31-Oct-24 page 31 of 40 © Banner Engineering Corp. All rights reserved.
-
Page 32: Chapter Contents
TL70 Pro Ethernet Modular Tower Light Instruction Manual Chapter Contents FCC Part 15 Class A for Unintentional Radiators............................... 33 Industry Canada ICES-003(A).................................... 33 Dimensions......................................... 34 Chapter 5 Specifications Supply Voltage Connections Power over Ethernet models: 42.5 V DC to 57 V DC "Wiring" on page 5 PoE (Class 0 - 802.3af, 802.3at Type 1) Operating Temperature Ethernet models: 18 V DC to 30 V DC... -
Page 33: Fcc Part 15 Class A For Unintentional Radiators
Specifications TL70 Pro Ethernet Modular Tower Light Instruction Manual Default Light Segment Characteristics Color Coordinates Dominant Wavelength (nm) or Color Temperature Lumen Output Per Segment Color (CCT) (Typical at 25 °C) Green 0.181 0.735 34.8 0.691 0.308 15.4 Yellow 0.473 0.474... -
Page 34: Dimensions
TL70 Pro Ethernet Modular Tower Light Instruction Manual Specifications Dimensions M30 × 1.5 (mounting nut 24.9 mm included) [0.98”] Model Height (H) 1 light module 87.6 mm (3.45 in) 1 light module, 1 audible module 144.3 mm (5.68 in) 2 light modules 137.3 mm (5.41 in) -
Page 35: Chapter 6 Accessories
TL70 Pro Ethernet Modular Tower Light Instruction Manual Chapter Contents Cordsets ..........................................35 Mounting Brackets......................................36 Elevated Mount System ..................................... 37 LMB Sealed Right Angle Bracket ..................................38 Chapter 6 Accessories Cordsets 4-Pin Single-Ended, M12 Female Cordsets Model Length... -
Page 36: Mounting Brackets
TL70 Pro Ethernet Modular Tower Light Instruction Manual Accessories 4-Pin D-Code Double-Ended, M12 Male-RJ45 Male, Shielded Cordsets Model Length Dimensions RJ45 Pinout (Male) M12 Pinout (Male) STP-M12D-403 0.9 m (2.95 ft) Ø 6.2 mm STP-M12D-406 1.83 m (6 ft) RJ45 STP-M12D-415 4.57 m (15 ft) -
Page 37: Elevated Mount System
Accessories TL70 Pro Ethernet Modular Tower Light Instruction Manual SSA-MBK-EEC1 • Single 30 mm hole • 8 gauge steel, black finish (powder coat) • Front surface for customer-applied labels Hole size: A = ø 7 , B = ø 30 LMBE12RA35 38.25 • Direct mounting of stand-off pipe, with common bracket type • Zinc-plated steel • 1/2-14 NPSM nut • Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 35 mm Hole center spacing: 20.0 2X Ø9 LMBE12RA45 38.25 •... -
Page 38: Lmb Sealed Right Angle Bracket
TL70 Pro Ethernet Modular Tower Light Instruction Manual Accessories Pipe Mounting Flange Model Description Construction • Elevated-use stand-off pipes (½ in, 1/2-14 4x ø5.5 NPSM NPSM/DN15) Die-cast zinc base with SA-F12 • M5 mounting hardware and nitrile ø28... -
Page 39: Chapter 7 Banner Engineering Corp Limited Warranty
Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. - Page 40 LinkedIn X (formerly Twitter) Facebook © 2024. All rights reserved. www.bannerengineering.com...
Need help?
Do you have a question about the TL70 Pro and is the answer not in the manual?
Questions and answers