Subscribe to Our Youtube Channel
Related Manuals for Banner TL70 Pro Modbus Modular Tower Light
Summary of Contents for Banner TL70 Pro Modbus Modular Tower Light
- Page 1 TL70 Pro Modbus Modular Tower Light Instruction Manual Original Instructions p/n: 243130 Rev. A July 03, 2024 © Banner Engineering Corp. All rights reserved.
-
Page 2: Table Of Contents
FCC Part 15 Class A for Unintentional Radiators ............................8 Industry Canada ICES-003(A)..................................8 Dimensions ........................................9 Chapter 6 Accessories Cordsets ........................................10 Mounting Brackets......................................11 Elevated Mount System....................................12 LMB Sealed Right Angle Bracket ................................13 Chapter 7 Banner Engineering Corp Limited Warranty............. 14 ... -
Page 3: Chapter 1 Features
Chapter 1 Features Banner's TL70 Pro Modbus Modular Tower Light is a 70 mm, modular LED indicator with bright and uniform light. The modularity gives the user flexibility to customize tower lights as needed and change positions in the field. The TL70 is also available preassembled for easy installation. -
Page 4: Chapter 2 Installation Instructions
TL70 Pro Modbus Modular Tower Light Instruction Manual Chapter Contents Assembling the Modules ...................................... 4 Chapter 2 Installation Instructions Assembling the Modules To assemble the modules: Align the notches on each module and press together. Rotate the top module clockwise to lock into place (notches shown in the locked position). -
Page 5: Chapter 3 Wiring
TL70 Pro Modbus Modular Tower Light Instruction Manual Chapter Contents Chapter 3 Wiring Wiring for Modbus Models Integral 4-pin A-Code M12 Male Quick-Disconnect Connector Pinout Wire Color Connection Brown 18 V DC to 30 V DC White RS-485 (+) -
Page 6: Chapter 4 Modbus Configuration Instructions
Tower Light Segment Modes....................................6 Chapter 4 Modbus Configuration Instructions For more information about the TL70 Pro Modbus Modular Tower Light device registers, refer to document PN 243474. Tower Light Segment Modes Basic Segment Mode Use a single run time register per LED segment to set it to Off, On, Flash, or Animation mode. -
Page 7: Chapter 5 Specifications
TL70 Pro Modbus Modular Tower Light Instruction Manual Chapter Contents FCC Part 15 Class A for Unintentional Radiators..............................8 Industry Canada ICES-003(A)....................................8 Dimensions........................................... 9 Chapter 5 Specifications Supply Voltage Operating Temperature 18 V DC to 30 V DC –40 °C to +50 °C (–40 °F to +122 °F) ... -
Page 8: Fcc Part 15 Class A For Unintentional Radiators
TL70 Pro Modbus Modular Tower Light Instruction Manual Specifications Default Light Segment Characteristics Color Coordinates Dominant Wavelength (nm) or Color Temperature Lumen Output Per Segment Color (CCT) (Typical at 25 °C) Green 0.181 0.735 34.8 0.691 0.308 15.4 Yellow 0.473 0.474... -
Page 9: Dimensions
Specifications TL70 Pro Modbus Modular Tower Light Instruction Manual Dimensions M30 × 1.5 (mounting nut 24.9 mm included) [0.98”] Internal threads 1/2-14 NPT Max Torque: 2.25 Nm [20 in-lbf] M12 × 1 Model Height (H) 1 light module 87.6 mm (3.45 in) 1 light module, 1 audible module 144.3 mm (5.68 in) -
Page 10: Chapter 6 Accessories
TL70 Pro Modbus Modular Tower Light Instruction Manual Chapter Contents Cordsets ..........................................10 Mounting Brackets.......................................11 Elevated Mount System ..................................... 12 LMB Sealed Right Angle Bracket ..................................13 Chapter 6 Accessories Cordsets 4-Pin Single-Ended, M12 Female Cordsets Model Length Style... -
Page 11: Mounting Brackets
Accessories TL70 Pro Modbus Modular Tower Light Instruction Manual Mounting Brackets All measurements are listed in millimeters, unless noted otherwise. SMB30A • Right-angle bracket with curved slot for versatile orientation • Clearance for M6 (¼ in) hardware • Mounting hole for 30 mm sensor •... -
Page 12: Elevated Mount System
TL70 Pro Modbus Modular Tower Light Instruction Manual Accessories LMBE12RA45 38.25 • Direct mounting of stand-off pipe, with common bracket type • Zinc-plated steel • 1/2-14 NPSM nut • Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 45 mm Hole center spacing: 35.0 2X Ø11 Elevated Mount System Model Features Components • Streamlined black PC or Gray PC thread cover •... -
Page 13: Lmb Sealed Right Angle Bracket
Accessories TL70 Pro Modbus Modular Tower Light Instruction Manual LMB Sealed Right Angle Bracket Model Description Construction Direct-Mount Models: Bracket kit with base, LMB30RA 30 mm adapter, set screw, fasteners, O-rings, Black polycarbonate and gaskets. Pipe-Mount Models: Bracket kit with base, ½-14 pipe adapter, set screw, fasteners, O- LMBE12RA ... -
Page 14: Chapter 7 Banner Engineering Corp Limited Warranty
Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. - Page 15 LinkedIn Twitter Facebook © 2024. All rights reserved. www.bannerengineering.com...
Need help?
Do you have a question about the TL70 Pro Modbus Modular Tower Light and is the answer not in the manual?
Questions and answers