Call Timer; Pre-Dialing; Auto Standby; Flash/Call Waiting - GE 21098GE3 User Manual

2. When finished, press the SPKR button or speaker button on the base
again to hang up.
Making A Call with The Speakerphone
1. Press the SPKR button on the handset or speaker button on base. Listen
for a dial tone.
2. Dial the number you want to call, or dial the number first then press the
SPKR button on handset or speaker button on the base.
3. When finished, press the SPKR button on the handset or speaker button
on the base again to hang up.

Call Timer

After you press the TALK/END/call back or SPKR button on the handset, the
built-in call timer shows on the display and counts the length of time of the
call in minutes and seconds.

Pre-Dialing

1. Make sure the phone is OFF (not in talk mode).
2. Enter the telephone number you want to call. The telephone number
shows in the handset display.
3. Press the TALK/END/call back or SPKR buttons on the handset, and the
number automatically dials.
NOTE: You may enter up to 32 pre-dial digits.
NOTE: If you want to delete the pre-dial number you entered, press the flash/
delete button until all of the digits are erased.

Auto Standby

If you place the handset in the cradle while the handset is off the hook
(during a call), the call is automatically disconnected.

Flash/Call Waiting

If you subscribe to the combined Call Waiting Caller ID service from your
local telephone company, you will receive Caller ID information (if available)
on Call Waiting calls. During a phone call, you will hear a beep to indicate
another call is waiting on the line and the Caller ID information for the
waiting call shows on the handset display.
34