Call Timer; Pre-Dialing; Auto Standby; Flash/Call Waiting - GE 25833 Instructions Manual

Call Timer

After you press the TALK•CALL BACK button on the handset, the built-in call timer shows
on the display and counts the length of time of the call in minutes and seconds.

Pre-Dialing

1. Make sure the phone is OFF (not in talk mode).
2. Enter the telephone number you want to call.The telephone number shows in the
handset display.
3. Press theTALK•CALL BACK or SPEAKER buttons on the handset, and the number
automatically dials.
NOTE: You may enter up to 32 pre-dial digits.
NOTE: If you want to delete the pre-dial number you entered, press the DELETE
button until all of the digits are erased, or press the *EXIT button to erase all
numbers at once.

Auto Standby

If you place the handset in the cradle while the handset is off the hook (during a call), the
call is automatically disconnected.
Ringer HI/LOW/OFF Shortcut
Apart from the setting in the main menu, there is a shortcut to set the ringer. Make sure
the phone is OFF (not in talk mode).
1. Press the #PAUSE/RINGER/RINGER button to go to RINGER VOLUME menu. SET
RINGER 1HI 2LOW 3OFF shows in the display.
2. Use the touch tone pad on the handset to select 1HI, 2LOW or 3OFF, or use the CALLER
ID-VOL (or) button to scroll to your selection.
3. Press #PAUSE/RINGER button to save your selection.You will hear a confirmation tone
and the new volume setting shows in the display for 2 seconds and you will hear a
confirmation tone.

Flash/Call Waiting

If you subscribe to the combined Call Waiting Caller ID service from your local telephone
company, you will receive Caller ID information (if available) on Call Waiting calls. During
a phone call, you will hear a beep to indicate another call is waiting on the line and the
Caller ID information for the waiting call shows on the handset display.
29