Answering Calls; All Imer; Auto Standby; Call Timer - GE 28811FE2 - Digital Cordless Phone User Manual

Dect 6.0 cordless handset speakerphone answering system

Hide thumbs Also See for 28811FE2 - Digital Cordless Phone:

Table of Contents

Answering Calls

1. When the phone rings, press the SPEAKER button on the handset.

- OR -

Pick up the handset and press the TALK button.

. When finished, press END/cancel to hang up.

NOTE: Adjust the handset volume by pressing the

CALLER ID-VOLUME ( 6 or 5) button during a call.

After you press the TALK or SPEAKER button on the handset, the built-in call timer shows

on the display and counts the length of time of the call in minutes and seconds.

If you place the handset in the cradle while the handset is off the hook (during a call),

the call is automatically disconnected.

There are two ways to set the ringer volume. One is the traditional way as described

in the Programming Functions; Handset Setup; Ringer Volume menus. The other one

is this short cut to ringer menu.

1. Make sure the phone is OFF (not in TALK mode).

. Press the #pause button to display SET RINGER LEVEL 5.

. Use the CALLER ID-VOLUME (6 or 5) button to scroll to your selection. LEVEL 5 is

the default setting.

. Press #pause button again to save and display the new selection for a few

seconds.

Table of Contents

28811 series