Technical Data - Truper PRE-1I Manual

Technical data

Description
Frequency
Inlet and outlet diameter
Maximum suction depth
Maximum manometric
head valve/ Maximum height
Maximum flow
Maximum water temperature
Conductors
Duty cycle
Insulation
WARNING
Avoid the risk of electric shock or severe injury. When the power cable gets damaged
it should only be replaced by the manufacturer or at a
The build quality of the electric insulation is altered if spills or liquid gets into the tool while in use.
Do not expose to rain, liquids and/or dampness.
Before gaining access to the terminals all power sources should be disconnected.
WARNING
Code
Voltage
Speed
Current
Power
50 minutes work x 20 minutes rest. Daily maximum 6 hours
Grade IP
The construction class of the tool is: Basic insulation.
The thermal insulation class of the motor windings: Class B.
PRE-1I
102857
Water pressure booster pump
127 V
60 Hz
3 450 RPM
9.5 A
750 W
(1 Hp)
1 - 11.5 NPT
7 m
164 ft
13.2 gal/min
140 °F
16 AWG
Class I
IPX4
The power cord has a Y-type cable restraint.
Authorized Service Center.
PRE-1/2I
102858
4.5 A
373 W
(1/2 Hp)
98 ft
10.6 gal/min
18 AWG
3
ENGLISH