Subscribe to Our Youtube Channel
Related Manuals for Truper PREM-1/2
Summary of Contents for Truper PREM-1/2
- Page 1 Manual Multistage pressure booster pump Domestic use with automatic control Applies for: Codes Models 102384 PREM-1/2 102385 PREM-3/4 102386 PREM-1 102387 PREM-1-1/3 Read this manual thoroughly CAUTION before using the tool.
- Page 2 Contents CAUTION Technical data To get the most out of the tool, Power requirements extend its lifespan, claim the General safety warnings warranty if necessary, and avoid for electric tools serious risks or injuries, please read this manual thoroughly Safety warnings for the use before using the tool.
- Page 3 The thermal insulation class of the motor windings: Class B. WARNING If the power cable is damaged, it must be replaced by the manufacturer or an Authorized TRUPER Service Center to prevent any risk of electric shock or significant accidents. The electrical insulation of this tool is altered by splashes or spillage of liquids during its operation.
- Page 4 Power requirements WARNING In case of faults or malfunctions, the ground connection provides a path with minimal resistance for electrical current, reducing the risk of electric shock. This tool is equipped with a power cord, adapter, and grounding plugs. The plug must be connected to an outlet that is installed and grounded in accordance with all local codes.
- Page 5 General safety warnings for electric tools WARNING! Read all safety warnings and all instructions listed below carefully. Failure to follow any of them may result in electric shock, fire, and/or serious injury. Keep the warnings and instructions for future reference. Work area Do not exceed your range of motion.
- Page 6 The control will maintain a constant water pressure and flow in the system whenever a water outlet is • Any repairs must be done only by an Authorized TRUPER Service Center. Otherwise, you risk electric shock and open during pump operation.
- Page 7 Assembly Assembly • The pump must be installed in a dry location, protected from the elements, allowing airflow for proper ventilation (A). With an ambient temperature not exceeding 104 °F • Use bolts to secure the pump to a concrete base to prevent any vibration (B).
- Page 8 Assembly Wiring Pressurized water outlet Power cord Cable to pump Pressurized water inlet Start up Priming • The first time you start the pump or after a long period of inactivity, or when air has entered the system, you must fill the pump with clean water before turning it on.
- Page 9 5. Store the device in a frost-free space (at least 41 °F) • Tool service must be performed only at an Authorized TRUPER Service Center. Service and maintenance performed by unqualified individuals can be dangerous and may cause personal injury, as well as void the...
- Page 10 • Wait for the device to cool down. If the problem persists, go to an Authorized TRUPER Service Center. • Faulty motor. • Go to an Authorized TRUPER Service Center. The flow rate is low. • Water shortage. • Ensure there is adequate water supply.
- Page 11 In the event of any problem contacting an Authorized TRUPER Service Center, please see our webpage WWW.TRUPER.COM to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-873 to get information about the nearest Service Center.
- Page 12 Warranty policy Codes Models Brand 102384 PREM-1/2 102385 PREM-3/4 102386 PREM-1 102387 PREM-1-1/3 Stamp of the business. Delivery date: WWW.TRUPER.COM 02-2024 ENGLISH...
Need help?
Do you have a question about the PREM-1/2 and is the answer not in the manual?
Questions and answers