Fujitsu FI-5750C Operator's Manual page 29

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
2.3Loading documents onto the ADF
1. Confirm the following items before loading documents
All the documents have the same width
Check the number of sheets in the document stack.
The standard of number of sheets that can be loaded on the scanner is as follows:
A4-size paper or smaller:
20 mm or less.
Note: 200 sheets at in 80g/m 2 .
Over A4-size paper:
10 mm or less.
Note: 100 sheets at 80g/m 2 .
All Rights Reserved, Copyright (C) PFU LIMITED 2003
1 | 2 | 3 | 4 | 5 | 6