Fujitsu FI-5750C Operator's Manual page 22

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
1.1 Names and functions of parts
1.2 Functions of the operator panel
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
1.1 NAMES AND FUNCTIONS OF PARTS (Continued from the previous page)
No. Name Function
13 EXT connector Connector port for optional units.
14 USB interface connector Used for connecting a USB interface cable from a PC.
15 SCSI interface connector Used for connecting a SCSI interface cable from a PC.
16 SCSI ID switch Used for setting SCSI ID (The setting at the factory shipment is ID=5).
17 Third Party Slot (Optional Slot) The slot for an option board.
18 Side guide button Used for adjusting the side guides.
19 Power inlet Used for connecting a power cable from the power outlet..
20 Power switch Used for turning ON/OFF the scanner.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
1 | 2 | 3 | 4