Fujitsu XG2600 Hardware Manual page 11

XG2600 Hardware Guide
Always follow the instructions for safe use of this device. Indicates that improper use can cause
Warning
severe damage to person, resulting in serious injury or death.
Do not insert or drop any foreign objects into the
device through the vent.
Also, prevent liquid such as water from entering
it.
In case a foreign object or liquid enters the
device, you must first unplug the power plug
from the socket and contact our engineer or an
engineer certified by Fujitsu.
Continuing to use the device in this condition
may result in electric shock, fire accident or
failure.
Do not score, cut, or rework the power cable.
Do not put any objects on the power cable. The
power cable should not be pulled, bent forcibly,
twisted or heated. These actions may damage the
cable.
Do not use the power cable while it is bundled
together. Otherwise electric shock or fire may
occur.
The same applies to other cables.
If there is lightning near the location, do not
touch this device, the power cable or other cables.
Failure to follow this may result in electric shock.
Do not connect or disconnect the power plug with
wet hands.
Failure to follow this may result in electric shock.
The cover must only be opened by qualified
service personnel.
Also, the power cable must be unplugged during
maintenance.
Failure to follow this may result in electric shock.
Also, keep removed screws out of reach of
children so that they cannot put the screws into
their mouths accidentally.
In the event they put the screws into their mouths,
consult a doctor immediately.
You cannot use this device at a voltage other than
the indicated supply voltage.
Do not overload the electric outlet.
Failure to follow these warnings may result in
electric shock or fire.
Warnings
If you notice abnormal conditions such as
overheating, smoke emission, or odor, stop using
this device immediately, and pull the power cable
plug from the socket. Make sure that abnormal
conditions such as smoke no longer exist and
contact our engineer or an engineer certified by
Fujitsu.
Continuing to use the device in this condition
may result in electric shock or fire.
Disconnect 2 power supply cords before service
to avoid electric shock.(Except for active
maintenance)
For interface connectors, do not insert a
connector other than the appropriate connector
for a specific line.
Failure to follow this may result in electric shock
or failure.
The plastic sheets used for packaging must be
kept out of reach of children so that they cannot
put the sheets in their mouths or put their heads
into them.
Failure to follow this may result in suffocation.
When cleaning, do not use cleaning sprays (that
includes inflammable material) because it may
cause device breakdown or fire.
Do not use this device when the power cable or
plug is damaged or the socket is loose.
Continuing to use the device in this condition
may result electric shock or fire.
Do not disassemble, dismantle, modify or
reproduce this device.
Failure to follow this may result in electric shock,
fire or failure.
11