Table of Contents
Advertisement
DHCP Configuration
Us e the DHCP Configuration on LAN menu to configure the Router to act as a DHCP server for the LAN.
Configure LAN DHCP services by defining the following parameters:
Start IP Address
End IP Address
Netmask
Default Gateway
Leased Time
Primary DNS
Secondary DNS
Primary WINS
Secondary WINS
Domain Name
State
DSL-502G ADSL Router User's Guide
Figure 18. DHCP Configuration Menu
Type in the base address for the IP pool of unassigned IP addresses.
Type in the last address of the contiguous IP address range to be used by
the Router for DHCP function.
Type in a subnet mask IP address.
Type in the Default Gateway IP Address that will be assigned to and used
by the DHCP clients.
This specifies the amount of time (in hours) a client can lease an IP
address, from the dynamically allocated IP pool.
Enter any Internet DNS server IP address available through the WAN
connection or use the DNS settings supplied by your service provider.
Enter a backup DNS IP address or leave blank.
Some LANs may require using WINS servers, enter the IP address of the
WINS server or leave blank.
Enter a back-up WINS server IP address or leave blank.
Enter a domain name for the network group or leave blank.
Default = enabled. If you wish to disable the DHCP function, select disabled
from the drop-down menu.
37
Advertisement
Table of Contents
