Cisco Catalyst WS-C2924-XL Hardware Installation Manual page 56

Installing the Switch in a Rack
Figure 2-4 Attaching Brackets on Catalyst 2912 XL, 2924C XL, and 2924 XL Fixed-Port Switches
(Front-Panel Forward)
Phillips
flat-head
screws
Phillips
truss-head
screws
Catalyst 2900 Series XL Hardware Installation Guide
2-12
For a 19-inch or a telco rack, use the supplied Phillips flat-head screws to
•
attach the long side of the bracket to the switch.
For a 23- or 24-inch rack, use the supplied Phillips truss-head screws to attach
•
the short side of the bracket to the switch.
Figure 2-3, Figure 2-5,
a bracket to one side of the switch. Follow the same steps to attach the second
bracket to the opposite side of the switch.
19" configuration
23" and 24" configuration
Figure 2-6, Figure 2-7, and
Chapter 2 Installation
Figure 2-8 show how to attach
78-6461-04