Cisco Catalyst WS-C2924-XL Hardware Installation Manual page 78

Connecting to DC Power
Figure 2-26 Completed Wiring of Terminal Block Plug
Step 7 Insert the terminal block plug into the terminal block header on the rear panel of
the switch. (See
Secure the wires coming from the terminal block so that they will not be disturbed
Caution
by casual contact. For example, use tie wraps to secure the wires to a rack.
Catalyst 2900 Series XL Hardware Installation Guide
2-34
Figure 2-27.)
Chapter 2
Return
Feed A
Negative
Return
Feed B
Negative
Installation
78-6461-04