Chapter 3: Connecting The Switch; Overview; Figure 3-1: Typical Network Configuration - Cisco SRW224P User Manual

24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet

Chapter 3: Connecting the Switch

Overview

This chapter will explain how to connect network devices to the Switch. The following diagram shows a typical
network configuration.

Figure 3-1: Typical Network Configuration

When you connect your network devices, make sure you don't exceed the maximum cabling distances, which are
listed in the following table:
From
Switch
Hub
Switch or Hub
*A hub refers to any type of 100Mbps hub. A 10Mbps hub connected to another 10Mbps hub can span up to 100
meters (328 feet).
Chapter 3: Connecting the Switch
Overview
Maximum Cabling Distances
To Maximum Distance
Switch or Hub 100 meters (328 feet)
Hub 5 meters (16,4 feet)
Computer 100 meters (328 feet)
6