Cisco SRW2008MP Firmware Upgrade Faq
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Switch
  5. SRW2008MP
  6. Firmware upgrade faq
Cisco SRW2008MP Firmware Upgrade Faq

Cisco SRW2008MP Firmware Upgrade Faq

Cisco srw2008mp: supplementary guide
Hide thumbs
1
2
3
4

Advertisement

Table of Contents

SRW2008MP Firmware Upgrade FAQ
Document ID: 109169
Questions
Introduction
How do I upgrade the firmware on the SRW2008MP?
Related Information
Introduction
This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business
products (formerly Linksys Business Series).
Refer to Cisco Technical Tips Conventions for information on document conventions.
Q. How do I upgrade the firmware on the SRW2008MP?
A. Complete the appropriate procedure in this section in order to upgrade the firmware on the
SRW2008MP.

Firmware Download

Download new firmware from the Cisco Software Center.
Note: Cisco recommends that you perform all firmware upgrades on your local network.

Firmware Upgrade via Web UI

1.
Enter the IP address for your switch in a browser. For example, if your switch uses
the default IP address, enter http://192.168.1.254 in your browser in order to access
the switch.
2.
On the login screen, enter admin in the User Name field and leave the password
blank.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SRW2008MP and is the answer not in the manual?

Questions and answers

Related Manuals for Cisco SRW2008MP

Summary of Contents for Cisco SRW2008MP

  • Page 1 How do I upgrade the firmware on the SRW2008MP? Related Information Introduction This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series). Refer to Cisco Technical Tips Conventions for information on document conventions.
  • Page 2 Go to Admin > Firmware Upgrade. Click the via HTTP radio button. Click Browse in order to locate the firmware file. Click Proceed.
  • Page 3 Firmware Upgrade Via TFTP Upgrade Note: TFTP server software is required for this procedures. Enter the IP address for your switch in a browser. For example, if your switch uses the default IP address, enter http://192.168.1.254 in your browser in order to access the switch.

  • Page 4: Related Information

    Technical Support & Documentation − Cisco Systems Contacts & Feedback | Help | Site Map © 2008 − 2009 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of Cisco Systems, Inc.

Table of Contents