Table of Contents
Advertisement
PLAYING AN AUDIO FILE
Basic Remote Controller Operations
G To start playback
Press the [
] button. The remote controller beeps to
indicate that playback has started.
• Pressing the [
] button while the camera is off turns
on power and starts playback.
G To pause playback
Press the [
] button (remote controller beeps).
Pressing the [
] button or the [
playback (remote controller beeps).
• If the Auto Power Off trigger time (about two minutes or
five minutes) is reached while playback is paused, the
camera will automatically turn off.
G To fast forward the playback
Hold down the [
] button for a few seconds until fast
forward starts.
G To fast reverse the playback
Hold down the [
] button for a few seconds until fast
reverse starts.
G To skip to the beginning of the current track
Press the [
] button (remote controller beeps).
To skip to the beginning of a previous track, press the
[
] button multiple times (remote controller beeps).
The current track number is shown on the LCD.
(EX-M20U Only)
] button resumes
G To skip to the beginning of the next track
Press the [
] button (remote controller beeps).
To keep skipping forward, press the [
times (remote controller beeps). The current track
number is shown on the LCD.
G To stop playback
Press the [
] button (remote controller beeps).
• Pressing the [
from the beginning of the track where it was stopped.
G To adjust volume
Press the [+] or [–] volume buttons to adjust volume to
the desired level. The LCD shows the current volume
level.
G To turn off power
Press the camera's power button.
• Camera power also turns off automatically if you do not
perform an operation for about 10 seconds after
playback is stopped.
IMPORTANT!
• The button operation tone does not sound if the
camera's button tone function is turned off (page
107).
• You cannot use fast forward, fast reverse, or skip
while the current volume level is shown on the LCD.
158
] button multiple
] button again will restart playback
Advertisement
Table of Contents
