Casio EX-M20U - 4 User Manual page 2

VIEWING IMAGES ON A COMPUTER
IMPORTANT!
• Do not try to establish a connection between the
camera and computer before installing the USB
driver onto the computer.
• If you want to transfer files from the camera's built-in
memory to a computer, make sure there is no
memory card loaded in the camera before you place
it onto the USB cradle.
1.
What you should do first depends on whether
your computer is running under Windows 98/
Me/2000 or Windows XP.
I Windows 98/Me/2000 Users
• Start from step 2 to install the USB driver.
• Note that the example installation presented here
uses Windows 98.
I Windows XP Users
• Installation of the USB driver is not required, so jump
directly to step 6.
2.
Set the bundled CD-ROM into the CD-ROM
drive of your computer.
3.
Click [USB driver] and then [Install].
• This starts installation.
• The following steps show installation under the
English version of Windows.
4.
On the screen that appears after installation
is complete, select the "Yes, I want to restart
my computer now." check box and then click
[Finish] to restart your computer.
5.
Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.
128