PLAYING AN AUDIO FILE
Basic Remote Controller Operations
To start playback
Press the [
] button. The remote controller beeps to
indicate that playback has started.
• Pressing the [
] button while the camera is off turns
on power and starts playback.
To pause playback
Press the [
] button (remote controller beeps).
Pressing the [
] button resumes playback (remote
controller beeps).
• If you leave playback paused for about two minutes, the
camera and remote controller turn off automatically.
To fast forward the playback
Hold down the [
] button for a few seconds until fast
forward starts.
To fast reverse the playback
Hold down the [
] button for a few seconds until fast
reverse starts.
To skip to the beginning of the current track
Press the [
] button (remote controller beeps).
To skip to the beginning of a previous track, press the
[
] button multiple times (remote controller beeps). The
current track number is shown on the LCD.
(EX-M2 Only)
To skip to the beginning of the next track
Press the [
] button (remote controller beeps).
To keep skipping forward, press the [
times (remote controller beeps). The current track number
is shown on the LCD.
To stop playback
Press the [
] button (remote controller beeps).
To adjust volume
Press the [+] or [–] volume buttons to adjust volume to the
desired level. The LCD shows the current volume level.
To turn off power
Press the camera's power button.
• Camera power also turns off automatically if you do not
perform an operation for about 10 seconds after play-
back is stopped.
IMPORTANT!
• The button operation tone does not sound if the
camera's button tone function is turned off (page 72).
• You cannot use fast forward, fast reverse, or skip
while the current volume level is shown on the LCD.
100
] button multiple
Need help?
Do you have a question about the Exilim EX-M2 and is the answer not in the manual?