NOTICE!
Damage to the device due to high voltages!
The device can be damaged if it is operated with the incorrect voltage or if high voltage peaks occur. In the worst case, excess vol‐
tages can also cause a risk of injury and fires. Make sure that the voltage specification on the device matches the local power grid
before plugging in the device. Only operate the device from professionally installed mains sockets that are protected by a residual
current circuit breaker (FI). Ensure that the power cord plug is easily accessible at all times if it is the only device to safely disconnect
the device from the mains supply. As a precaution, disconnect the device from the power grid when storms are approaching or it the
device will not be used for a longer period.
NOTICE!
Risk of fire due to installation of a wrong fuse!
Using fuses of a different type than compatible with the device may cause a fire and seriously damage the device. Only use fuses of
the same type. Observe the labelling on the device casing and the information in the "Technical data" chapter.
NOTICE!
Possible staining due to plasticiser in rubber feet!
The plasticiser contained in the rubber feet of this product may react with the coating of the floor and cause permanent dark stains
after some time. If necessary, use a suitable mat or felt slide to prevent direct contact between the product's rubber feet and the
floor.
Safety instructions
ColumnMix
9
Active Speaker
Need help?
Do you have a question about the Fun Generation ColumnMix and is the answer not in the manual?
Questions and answers