Optional Filter Kit; Warranty Conditions - GYS CUTTER 105 CT Manual

User manual
-

OPTIONAL FILTER KIT

OPTIONAL ANALOGUE KIT

WARRANTY CONDITIONS

The warranty covers any defects or manufacturing faults for two years from the date of purchase (parts and labour).
The warranty does not cover:
• Any other damage caused during transport.
• The general wear and tear of parts (i.e. : cables, clamps, etc.).
• Incidents caused by misuse (incorrect power supply, dropping or dismantling).
• Environment-related faults (such as pollution, rust and dust).
In the event of a breakdown, please return the item to your distributor, along with:
- a dated proof of purchase (receipt or invoice etc.).
- a note explaining the malfunction.
24
Translation of the original
instructions
Cutting current not suitable for the consu-
mables in use
Premature wear of consu- Inappropriate air pressure
mables
Air humidity
Dust filter (ref. 046580) with filtration to: 630 µm (0.63 mm).
Please note that the use of this filter reduces the duty cycle of your machine.
To avoid the risk of overheating due to clogged air vents, the dust filter should be cleaned on a
regular basis. Unclip and clean with compressed air.
The analogue CNC-1 kit (ref. 039988) enables simple information to be exchanged between the
plasma cutter and the numerical control of a cutting table, to ensure correct operation.
CUTTER 105 CT
Refer to «Setting the cutting current»
section.
Refer to «Setting the air pressure» sec-
tion.
Purge the air filters in the compressed air
system. Install the additional filter-dryer,
ref. 039728.