Related Manuals for Clarke CAT221
Summary of Contents for Clarke CAT221
- Page 1 PAINT DRYING AIR BLOW GUN MODEL NO: CAT221 PART NO: 3120531 USER & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0324...
-
Page 2: Specification
INTRODUCTION Thank you for purchasing this CLARKE Blow Gun. This ergonomic and lightweight air operated paint dryer, with an adjustable air regulator at the handle’s base, is ideal for rapid drying of water based paint for a professional finish. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. -
Page 3: Compressed Air Requirements
COMPRESSED AIR REQUIREMENTS WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU ARE FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF COMPRESSORS AND COMPRESSED AIR SUPPLY. Use only clean, dry, regulated compressed air as a power source. A build-up of moisture or oil in the air compressor will accelerate wear and corrosion in any air powered tool. -
Page 4: General Safety Rules
GENERAL SAFETY RULES CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN PERSONAL INJURY AND/OR DAMAGE TO PROPERTY. WORK ENVIRONMENT 1. Keep the work area clean and tidy. 2. Dress appropriately - DO NOT wear loose clothing or jewellery. Tie long hair out of the way. -
Page 5: Before Use
15. ALWAYS disconnect from the air supply when performing any maintenance. 16. DO NOT use a blow gun if it is defective or operating abnormally. 17. ALWAYS maintain the blow gun with care. Keep it clean for the best and safest performance. -
Page 6: Disconnecting The Air Supply
Your blow gun has been designed to give long and trouble free service. If, however, having followed the instructions in this booklet carefully, you encounter problems, take the item to your local CLARKE dealer. ACCESSORIES A wide range of accessories is available including filter/regulators, lubricators, high-pressure hoses (5 to 50 metres) etc. -
Page 7: Component Parts
COMPONENT PARTS Description No Description Main housing Stainless steel filter net Brass threaded insert Filter net hood Rubber O-ring Air regulator Airflow diffuser Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the CAT221 and is the answer not in the manual?
Questions and answers