Related Manuals for Clarke CAT210
Summary of Contents for Clarke CAT210
- Page 1 AIR BLOW GUN WITH HOSE MODEL NO: CAT210 PART NO: 3120527 OPERATING & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC1019 - ISS 1...
-
Page 2: Specification
INTRODUCTION Thank you for purchasing this CLARKE Blow Gun. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Compressed Air Requirements
COMPRESSED AIR REQUIREMENTS WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU ARE FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF COMPRESSORS AND COMPRESSED AIR. Use only clean, dry, regulated compressed air as a power source. Air compressors used with the tool must comply with the appropriate European Community Safety Directives. -
Page 4: General Safety Rules
GENERAL SAFETY RULES CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN PERSONAL INJURY AND/OR DAMAGE TO PROPERTY. WORK ENVIRONMENT 1. ALWAYS keep the work area clean and tidy. 2. ALWAYS dress appropriately - Do not wear loose clothing or jewellery. Tie long hair out of the way. -
Page 5: Transport And Storage
14. DO NOT point directly at a person’s skin or at a fire. 15. DO NOT carry out any alterations or modifications to the blow gun. 16. ALWAYS disconnect from the air supply when performing maintenance. 17. DO NOT use the blow gun if it is defective or operating abnormally. 18. -
Page 6: Maintenance
Your CLARKE air tool has been designed to give long and trouble free service. If, however, having followed the instructions in this booklet carefully, you encounter problems, take the unit to your local CLARKE dealer. -
Page 7: Component Parts
COMPONENT PARTS Description No Description Main Housing O-ring Spring Trigger O-ring Valve stem Air inlet O-ring O-ring O-ring Air nozzle seat Valve stem Air nozzle Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...