Chapter 3 Chassis Installation Procedures; Setting Up The Chassis - Cisco CISCO1841 - 1841 Integrated Services Router Hardware Installation Manual

Chassis Installation Procedures
This chapter describes how to install your Cisco 1800 series fixed-configuration router on a desktop or
on a wall. It includes the following sections:
•
•
To see translations of the warnings that appear in this publication, see the
Note
Safety Information for Cisco 1800 Integrated Services Routers (Fixed)
device.
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
Warning This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017

Setting Up the Chassis

Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord.
Warning
Statement 1
You can set a Cisco 1800 series fixed-configuration router on a desktop or mount it on a wall. See the
applicable instructions in the following sections.
•
•
•
OL-6425-03
Setting Up the Chassis, page 3-1
Installing the Chassis Ground Connection, page 3-3
Setting a Cisco 1800 Series Fixed-Configuration Router on a Desktop
Chassis Grounding
Mounting a Cisco 1800 Series Fixed-Configuration Router on a Wall
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
3
C H A P T E R
Regulatory Compliance and
document that accompanied this
3-1