Saving A Configuration - Cisco 761M Installation Manual

Saving a Configuration

Table B-4
Blinking LED
Line
CH 1
Line
CH 1
CH 2
Saving a Configuration
We advise that you store a copy of your router configuration in a safe place. If your
configuration is corrupted, it can be restored using the download process described in the
"Loading a Configuration" section.
The following example appends the configuration to a file by using HyperTerminal for
Windows, a common terminal emulation software program.
Note
data.
To save a configuration, complete the following steps:
Step 1
Step 2
Step 3
Step 4
Step 5
B-8
Cisco 700 Series Router Installation Guide
LED Error Messages—Software Download (continued)
Error Code
E-3
E-5
Hyperterminal does not create new files. The file must exist before you upload the
Connect to the router as described in the "Establishing a Terminal Connection"
section.
Enter the upload command at the command-line prompt, but do not press
Return after you enter the command:
Host> Upload
Select Transfer>Capture Text.
Select the file and directory in which you want to save the file.
Click OK.
Description of Error
One line in the software image file has a bad checksum,
usually because of a temporary line error. Start the software
download process again.
The software image file has a bad or missing checksum.
Start the software load process again. If the same error
occurs, replace the software image file.