Router Configuration Requirements; Configuration Requirements For Ni1 - Cisco 761M Installation Manual

Router Configuration Requirements

Table C-6
Line Provision
Issue 2 (NI1)
TEI
CACH
CS
Call transfer
3-way call conferencing
EKTS
Set Option
1 If connecting at U interface.
2 A blank cell indicates that the configuration option is not applicable to the line
provision.
Router Configuration Requirements
This section is a list of configuration requirements for Cisco 700 series routers when using
specific switch types. After your ISDN line is ordered and installed, if your router does not
automatically detect the switch type, you can use the configuration information in this
section to configure your Cisco 700 series router.

Configuration Requirements for NI1

Table C-7 lists the router configuration requirements when using Cisco 700 series routers
with an Lucent 5ESS NI1 switch in a multipoint configuration.
Note
C-10
Cisco 700 Series Router Installation Guide
Northern Telecom DMS-100 Provisioning Summary
(ACOU Not Supported) (continued)
The NI1 switch does not support a point-to-point configuration.
Configuration
–
DYNAMIC
No
Yes
Yes
Yes
Yes
2 call appearances