Cisco 4500M Software Manual page 388

Software guide
Table of Contents

Advertisement

Overview of QoS
Internal DSCP Values
The following sections describe the internal DSCP values:
Internal DSCP Sources
During processing, QoS represents the priority of all traffic (including non-IP traffic) with an internal
DSCP value. QoS derives the internal DSCP value from the following:
The trust state of traffic is the trust state of the ingress interface unless set otherwise by a policy action
for this traffic class.
QoS uses configurable mapping tables to derive the internal 6-bit DSCP value from CoS, which are 3-bit
values (see
Egress ToS and CoS Sources
For egress IP traffic, QoS creates a ToS byte from the internal DSCP value and sends it to the egress
interface to be written into IP packets. For trust-dscp and untrusted IP traffic, the ToS byte includes
the original 2 least-significant bits from the received ToS byte.
The internal ToS value can mimic an IP precedence value (see
Note
For all egress traffic, QoS uses a configurable mapping table to derive a CoS value from the internal ToS
value associated with traffic (see the
sends the CoS value to be written into ISL and 802.1Q frames.
For traffic received on an ingress interface configured to trust CoS using the qos trust cos command, the
transmit CoS is always the incoming packet CoS (or the ingress interface default CoS if the packet is
received untagged).
When the interface trust state is not configured to trust dscp using the qos trust dscp command, the
security and QoS ACL classification will always use the interface DSCP and not the incoming packet
DSCP.
Software Configuration Guide—Release 12.2(25)EW
29-12
Internal DSCP Sources, page 29-12
Egress ToS and CoS Sources, page 29-12
For trust-CoS traffic, from received or ingress interface Layer 2 CoS values
For trust-DSCP traffic, from received or ingress interface DSCP values
For untrusted traffic, from ingress interface DSCP value
the"Configuring DSCP Maps" section on page
29-45).
"Configuring the DSCP-to-CoS Map" section on page
Chapter 29
Configuring QoS
Table 29-1 on page
29-4).
29-47). QoS
OL-6696-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

4500 series

Table of Contents