Interfaces And Leds; Nse-100 Leds - Cisco 7304 Installation And Configuration Manual

NSE-100 Description

Interfaces and LEDs

Figure 1-1
7300-NSE-100
NETWORK SERVICES ENGINE 100
2
LED Label Color
DISK 0 Green/Yellow
GE0 LINK Green/Yellow
GE1 LINK Green/Yellow
FE Management Port Green/Yellow
LINK
PRIMARY Green
SECONDARY Green
SYSTEM-UP Green/Yellow
Cisco 7304 Network Service Engine Installation and Configuration
1-2

NSE-100 LEDs

DISK 0
RESET
PRIMARY SECONDARY
SYSTEM-UP
3
4
State Function
Green CompactFlash Disk is being accessed.
Yellow CompactFlash Disk access failure.
Off Default state on power up.
Green Gigabit Ethernet port 0 is up.
Yellow Gigabit Ethernet port 0 line protocol is down due to a link error or other
conditions.
Off Default state on power up, Gigabit Ethernet port 0 has been administratively
shut down, or a fatal hardware error has occurred.
Green Gigabit Ethernet port 1 is up.
Yellow Gigabit Ethernet port 1 line protocol is down due to a link error or other
conditions.
Off Default state on power up, Gigabit Ethernet port 1 has been administratively
shut down, or a fatal hardware error has occurred.
Green Fast Ethernet physical link is up.
Yellow Line protocol is down due to a link error.
Off Default state on power up or has been administratively shut down.
On NSE is up and running.
Off Default state on power up, or NSE is powered off.
On The NSE is the standby NSE.
Off The NSE is not active.
Green Cisco IOS is up and running.
Yellow ROMmon is booting up, ROMmon detects a fatal hardware error, or ROM-
mon is hanging before the system completes the bootup process.
Off ROMmon has completed the bootup process and the system either is in the
autoboot stage or is waiting for a user command at a rommon#> prompt, or
the power is off.
COMPACT FLASH
GE 0
RX TX
LINK
5
Chapter 1 NSE-100 Overview
CONSOLE
FE MANAGEMENT
GE 1
RX TX
LINK
6
AUX
PORT
LINK
7
OL-3967-01