Description; Nse-150 Memory Information - Cisco 7304 Installation And Configuration Manual

Chapter 2 NSE-150 Overview
•
•
•
•

NSE-150 Memory Information

To determine the memory configuration of your NSE-150, use the show version command.
The following example shows an NSE-150 installed in a Cisco 7304 router:
Router# show version
Cisco IOS Software, 7300 Software (C7300-JS-M), Version 12.2(31)SB
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Thu 13-Jul-06 05:34 by wsatchel
ROM: System Bootstrap, Version 12.2(20060308:003941)
7304-R1 uptime is 1 day, 14 hours, 58 minutes
Uptime for this control processor is 1 day, 14 hours, 58 minutes
System returned to ROM by power-on
System restarted at 23:01:36 PDT Sun Jul 16 2006
System image file is "disk0:c7300-js-mz.v122_31_sb_oib_throttle-060712"
cisco 7300 (NSE150) processor (revision 0x00) with 2064383K/32768K bytes of memory.
Processor board ID SMQ0908N06Z
SB-1 CPU at 800Mhz, Implementation 0x401, Rev 0.2, 512KB L2 Cache
4 slot midplane, Version 67.49
Last reset from power-on
PXF processor tmc0 'system:pxf/ucode1' is running ( v1.0 ).
PXF processor tmc1 'system:pxf/ucode1' is running ( v1.0 ).
5 FastEthernet interfaces
5 Gigabit Ethernet interfaces
5 Packet over SONET interfaces
2045K bytes of non-volatile configuration memory.
62592K bytes of ATA compact flash in bootdisk (Sector size 512 bytes).
125184K bytes of ATA compact flash in disk0 (Sector size 512 bytes).
Configuration register is 0x0
Table 2-1
configuration information for the NSE-150.
Table 2-1 NSE-150 Memory Specifications
Memory Type Memory Size
DRAM 2 GB
SDRAM 2GB
Non-upgradeable boot 512 KB
ROM
Upgradeable boot 2 MB
ROM
OL-3967-01
NVRAM for storing the system configuration and environmental monitoring logs. NVRAM uses a
lithium battery to maintain its contents when disconnected from power.
Non-upgradeable boot ROM provides a "golden copy" of the default ROMmon image.
Auxiliary port with full data terminal equipment (DTE) functionality
Console port with full data communications equipment (DCE) functionality
provides memory specifications and Table 2-2 provides user-replaceable memory
Quantity

Description

2 2 1-GB SODIMMs
1 built-in SDRAM SODIMMs
1 OTP ROM for the ROM monitor (ROMmon)
2 Programmable ROM
Cisco 7304 Network Service Engine Installation and Configuration
NSE-150 Memory Information
1
2-5