System Messages; Recovering A Lost Password; Cisco Technical Assistance Center - Cisco 2612 Hardware Installation Manual

Hardware installation guide
Hide thumbs Also See for 2612:
Table of Contents

Advertisement

System Messages

System Messages
This section describes system error and recovery messages that may appear when operating a Cisco 2600
series router. Error messages for Cisco 2600 series routers powered by the Cisco redundant power
system are described in the publication
The Cisco IOS software displays system error and recovery messages on an external device console
terminal screen. (For more information, see the
on page
The terminal should display one of the following prompts:
Router>
or
Router#
The Cisco IOS software checks the system condition once every 30 seconds. If the condition still exists,
the system error message reappears; if the system error condition has cleared, a recovery message
appears.
To see descriptions of the system error and recovery messages and LED conditions that might
accompany them, refer to the
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122sup/122sems/semsvol1/emfbgp.
htm#xtocid10

Recovering a Lost Password

You can recover a lost enable password, but an enable secret password is encrypted and is not
recoverable. If you lose an enable secret password that is configured on your router, you can replace it
with a new enable secret password.
For password recovery and replacement procedures for the Cisco 2600 series routers, refer to the
Password Recovery Procedure for the Cisco 2600 Series Routers
http://www.cisco.com/warp/public/474/pswdrec_2600.shtml

Cisco Technical Assistance Center

The following link connects you to release notes, field notices, security advisories, and troubleshooting
information maintained by the Cisco Technical Assistance Center (TAC):
http://www.cisco.com/pcgi-bin/Support/browse/psp_view.pl?p=Hardware:2600&s=Troubleshooting
Cisco 2600 Series Routers Hardware Installation Guide
A-4
3-20.)
(indicates user EXEC mode)
(indicates privileged EXEC mode)
Cisco IOS System Error Messages
Cisco RPS Installation
Guide.
"Connecting to a Console Terminal or Modem" section
online document at the following URL:
document at the following URL:
Appendix A
Troubleshooting
OL-2171-06

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents