Connecting To The Auxiliary Port - Cisco 2612 Hardware Installation Manual

Chapter 3 Installing the Router
Figure 3-23 Connecting to a Console Terminal

Connecting to the Auxiliary Port

To connect a modem to the auxiliary port on the router, perform the following procedure:
Connect a modem to the auxiliary port using the black RJ-45-to-DB-25 adapter cable. (See
Step 1
For information about auxiliary port pinouts, refer to the
Specifications
On the Cisco routers, the auxiliary port is color-coded black.
Note
Make sure that your modem and the auxiliary port on the router are configured for the same transmission
Step 2
speed (up to 115200 bps is supported) and hardware flow control with Data Carrier Detect (DCD) and
Data Terminal Ready (DTR) operations.
OL-2171-06
LINK
ETHERNE T 1 ACT
LINK ETHERNE T 0 ACT
CONSOLE
Console port (RJ-45)
RJ-45 to RJ-45
rollover cable
RJ-45-to-DB-25 adapter
document available online and on the Documentation CD-ROM.
Connecting to a Console Terminal or Modem
Cisco 2611
100-240V – 1A
50/60 Hz 47 W
W0
AUX
Laptop computer
RJ-45 to DB-9 or
Cisco Modular Access Router Cable
Cisco 2600 Series Routers Hardware Installation Guide
Figure 3-24.)
3-21