Advertisement
Quick Links
Advertisement
Related Manuals for HornBlasters PSYCHOBLASTERS V2
Summary of Contents for HornBlasters PSYCHOBLASTERS V2
- Page 1 Page 1 PSYCHOBLASTERS V2 INSTRUCTION MANUAL Review us on Google! Download the HB App!
- Page 2 INCLUDED HARDWARE - Horn Mounting Hardware - Compressor Mounting Hardware - 40 Amp Relay - Relay Wiring Harness - Relay Mounting Hardware - Horn Mounting Bracket MOUNTING THE AIR COMPRESSOR In the hardware bag, there is a bolt/nut bigger than the rest. This is used to mount the compressor.
- Page 3 MOUNTING THE AIR COMPRESSOR In the hardware bag, you will find four bolts and an L-bracket like pictured below. This is used to mount the horn. Simply bolt the L-bracket in either direction on the horn like you see below. After you find a secure location for the horns use the remaining bolts to mount the horn securely.
- Page 4 WIRING METHOD 1 (Honk horn via steering wheel) Connect the short red wire to the positive horn lead from your factory horn. You can either tap off the positive horn lead with a scotch-lok connector or remove the wire entirely from the stock horn and route it to the red wire on the relay.
Need help?
Do you have a question about the PSYCHOBLASTERS V2 and is the answer not in the manual?
Questions and answers