TRENDnet User's Guide
Appendix
Direct video access - RTSP
To access the video directly through RTSP, just visit the camera IP address
on port 554 by default. For example: 192.168.10.30:554 use the admin or
user password the login.
Direct video access - HTTP
To access the video directly through http, just visit the camera IP address
with "/Streaming/channels/2/httpPreview" as affix on port 80. For example:
192.168.10.30/Streaming/channels/2/httpPreview use the admin or user
password the login.
Get better video stream on TRENDnet View Pro
The TRENDnet View Pro is installing the TV-IP310PI sub stream video by
default for better connectivity. If your TRENDnet View Pro server is located
on the same local network with your camera and you have good enough
available bandwidth, you can change the setting on TRENDnet View Pro to
get the main stream RTSP video with better picture quality. The default
main stream video bitrate is 4,096Kbps.
© Copyright 2014 TRENDnet. All Rights Reserved.
To change the setting, browse to your camera, then right click on the
camera name. Click Camera Setup Wizard ... to invoke the setup window.
Click Next to setup the camera.
TV-IP311PI
55