NOTE If the setting value of the Network Storage Recording Time Per
Event option in General Setting is longer than the Interval time in
Network Storage Schedule, the recorded file will be a continuous
video clip.
For example, if you set the Network Storage Recording Time Per
Event as 10 seconds and the Interval as 5 seconds, recorded file
becomes a non‐stop video clip because the camera will record a
10‐second video clip every 5 seconds.
Event Configuration >> GPIO Trigger
Select the Enable option to enable the GPIO trigger function of the camera,
so that you can set Trigger Out function or send captured images within
the detecting area to the FTP server, email receiver, Network Storage
server, or the connected USB device. You have to configure corresponding
settings, such as FTP server and email server, to enable this feature.
- 52 -