Using The Utility - TRENDnet TPL-402E User Manual

4.2 Using the Utility

Double-click the desktop icon to open the Powerline Configuration Utility application.
Local
Device
The closest
powerline
adapter(s)
that connects
your
computer to
the electrical
system.
Remote
Devices
Powerline
adapters that
are connected to
the selected
Local Device
across the
electrical
system.
 To apply changes to Remote Devices through the Powerline Configuration Utility, you must enter
the Device Password (DPW) for each Remote Device located on the Device Label.
 If you have not already done so, please write down the 16-digit Device Password (DPW) and
corresponding MAC Address of each TPL-402E powerline adapter as this will be used to input
into the utility. This is located on the Device Label, please refer to Section 1.4.
Enter the 16-digit Device Password (DPW) for each Remote Device in the utility
1. Click one of the Remote Devices in the list.
2. Click Enter Password.
Rename Enter the
the Device
selected Password
Remote (DPW) for the
Device selected
Remote
Device
Scans for
Add a
Remote
Remote
Devices that
Device that
were not
was not
detected
detected
Privacy Tab
Change the
Network
Name/Security Key
Closes the
utility
application.