Table of Contents
Advertisement
Power Saving: The device will automatically reduce power usage when the connected
devices via Ethernet are powered off, unplugged or inactive for more than 3 minutes.
Erp (EuP) Operation: Standby Mode
Disconnect the Ethernet cables from the device Ethernet ports, and after 3 minutes,
the device will enter standby mode. The Power (PWR) LED will flash every 15 seconds
to indicate that the device is currently in standby mode.
To return to active mode, reconnect the Ethernet cables to the device Ethernet ports,
and the device will re-enter active mode.
Hide quick links:
Advertisement
Table of Contents
