Inventory List; Tools Required - ETI NETCOM ADH Replacement Procedure

This procedure addresses the
removal and replacement of the air
drying canisters in an ADH NETCOM
Automatic Air Dehydrator. The first
section addresses the replacement
of the canisters in the AC and DC
models. The second section,
starting on page 8, addresses the
replacement of the air drying
canisters in the ADH NETCOM AC
NEMA configuration. It is
recommended to read the entire
procedure prior to beginning work.

INVENTORY LIST

Identify the following items in this kit
prior to beginning work:
Item
Number
1
2
3
5
4
South Bend, Indiana USA | networketi.com
ADH NETCOM AIR DRYING CANISTERS
REPLACEMENT PROCEDURE
Part Item
Number Quantity
25529 1
25528 1
24053 1
14506 4
24056 1

TOOLS REQUIRED

The following tools are needed to
perform this procedure:
• Small straight slot screwdriver
• Ruler or other measuring device
• Cutting devices for tie wraps and
hoses
• Straight slot screwdriver
• Pencil
• Felt-tip marker
Even if only one canister is bad, this
procedure calls for the replacement
of both canisters so that both are
new and in the same known
condition.
Description
Right Side (Outer) Canister Assembly
Left Side (Inner) Canister Assembly
Tube Assembly
Tie Wraps
Instruction Manual (this document)
3
ADH INSTRUCTION MANUAL | PART NO.
NOTE
Item
24056 REV B