Inbound Filter - TRENDnet TEW-692GR User Manual

INBOUND FILTER

Add/Edit Inbound Filter Rule: Here you can add entries to the Inbound Filter Rules List below, or edit
existing entries.
Name: Enter a name for the rule that is meaningful to you.
Action: The rule can either Allow or Deny messages.
Remote IP Range: Define the ranges of Internet addresses this rule applies to. For a single IP address,
enter the same address in both the Start and End boxes. Up to eight ranges can be entered. The
Enable checkbox allows you to turn on or off specific entries in the list of ranges.
Clear: Re-initialize this area of the screen, discarding any changes you have made.
Inbound Filter Rules List: The section lists the current Inbound Filter Rules. An entry can be changed
by clicking the Edit icon or can be deleted by clicking the Delete icon. When you click the Edit icon, the
item is highlighted, and the "Edit Inbound Filter Rule" section is activated for editing.
In addition to the filters listed here, two predefined filters are available wherever inbound filters can be
applied:
Allow All: Permit any WAN user to access the related capability.
Deny All: Prevent all WAN users from accessing the related capability. (LAN users are not affected by
Inbound Filter Rules.)
45