Routing - TRENDnet TEW-692GR User Manual

ROUTING

Add/Edit Route: Adds a new route to the IP routing table or edits an existing route.
Destination IP: The IP address of packets that will take this route.
Gateway: Specifies the next hop to be taken if this route is used. A gateway of 0.0.0.0 implies there is
no next hop, and the IP address matched is directly connected to the router on the interface specified:
LAN or WAN.
Metric: The route metric is a value from 1 to 16 that indicates the cost of using this route. A value of 1 is
the lowest cost, and 15 is the highest cost. A value of 16 indicates that the route is not reachable from
this router. When trying to reach a particular destination, computers on your network will select the best
route, ignoring unreachable routes.
Interface: Specifies the interface -- LAN or WAN -- that the IP packet must use to transit out of the router,
when this route is used.
Clear: Re-initialize this area of the screen, discarding any changes you have made.
40