TRENDnet TEW-692GR User Manual page 30

so this AP must know the MAC Address (creates the WDS link) of the other AP, and the other AP must
have a WDS link back to this AP. Make sure the APs are configured with same channel.
(Note that WDS security is incompatible with mixed mode, like WPAPSK+WPA2PSK mixed, WEP AUTO and
802.1x, both feature cannot be used at the same time).
Configuring WDS with TEW-692GR: Enable the option for WDS and input the MAC Address of the
wireless device that also supports WDS in to the blank fields. You can add up to four additional devices
in the spaces provided. Click on apply at the bottom of the page, to apply your setting changes.
Enable the security seeing in security page, each WDS APs need to use same security setting.
(Note: WDS supports wireless g/n modes. The use multiple Access Point will reduces the overall
network throughput to ½ the WRT-893L.
HT Physical Mode: In HT (High Throughput) Physical mode setting allow for control of the 802.11n
wireless environment.
Channel BandWidth: Set channel width of wireless radio.
20 Channel Width = 20 MHz
20/40 Channel Width = Enables the router to operate on both 20/40 MHz
Guard Interval: Support Short/Long GI, the purpose of the guard interval is to introduce immunity to
propagation delays, echoes and reflections, to which digital data is normally very sensitive.
Long Guard Interval, 800 nsec
Short Guard Interval, 400 nsec
MCS: Fix MCS rate for HT rate.The Modulation and Coding Scheme (MCS) is a value that determines
the modulation, coding and number of spatial channels.
30