Troubleshooting - TRENDnet TEW-692GR Quick Installation Manual

450mbps concurrent dual band wireless n router

Hide thumbs Also See for TEW-692GR:

Troubleshooting

1. I typed http://192.168.10.1 in my Internet Browser's Address Bar, but an error message

says "The page cannot be displayed." How can I get into the TEW-692GR's web

configuration page?

1. Check your hardware settings again by following the instructions in Section 2.

2. Make sure the Network Port and Wireless lights are lit.

3. Make sure your TCP/IP settings are set to Obtain an IP address automatically (see the

steps below).

4. If you are still having problems, reset the TEW-692GR. To reset the TEW-692GR, take a

pin or paperclip and press the reset button on the back of the wireless router for 20

seconds. Then let go.

Windows 7

1. Go into the Control Panel, click Network and

Internet, click Network and Sharing Center, click

Change Adapter Settings and then right-click the

Local Area Connection icon and then click

Properties.

Windows Vista

Go into the Control Panel, click Network

and Internet, click Network and Sharing

Center, click Manage Network Connections

and then right-click the Local Area

Connection icon and then click Properties.

2. Click Internet Protocol Version 4(TCP/IPv4) and

then click Properties. Then click on Obtain an IP

address automatically.

2. Click Internet Protocol Version 4(TCP/IPv4) and

then click Properties. Then click on Obtain an IP

address automatically.

Table of Contents