1. Manuals
  2. Brands
  3. Lanner Manuals
  4. Desktop
  5. EAI-I133
  6. User manual

Lanner EAI-I133 User Manual

Embedded computing platform
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Embedded Computing Platform
Hardware Platforms for Intelligent Edge Computing
EAI-I133 User Manual
Version: 1.0
Date of Release: 2024-09-04

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EAI-I133 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lanner EAI-I133

Summary of Contents for Lanner EAI-I133

  • Page 1 Embedded Computing Platform Hardware Platforms for Intelligent Edge Computing EAI-I133 User Manual Version: 1.0 Date of Release: 2024-09-04...
  • Page 2 - assumed to be qualified in the servicing of computer equipment, such as professional system integrators, or service personnel and technicians. The latest version of this document can be found on Lanner’s official website, available either through the product page or through the Lanner Download Center page with a login account and password.

  • Page 3: Contact Information

    EAI-I133 User Manual Contact Information Taiwan Corporate Headquarters China Lanner Electronics Inc. Beijing L&S Lancom Platform Tech. Co., Ltd. 7F, No.173, Sec.2, Datong Rd. Guodong LOFT 9 Layer No. 9 Huinan Road, Xizhi District, New Taipei City 22184, Huilongguan Town, Changping District, Beijing...

  • Page 4: Federal Communication Commission Interference Statement

    EAI-I133 User Manual Acknowledgment Intel® and Intel® Core are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries. Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp. All other product names or trademarks are properties of their respective owners.

  • Page 5: Safety Guidelines

    EAI-I133 User Manual Safety Guidelines Follow these guidelines to ensure general safety: Keep the chassis area clear and dust-free during and after installation. Do not wear loose clothing or jewelry that could get caught in the chassis. Fasten your tie or scarf and roll up your sleeves.

  • Page 6: Sécurité De Fonctionnement

    The installation of this product must be performed by trained specialists; otherwise, a non-specialist might create the risk of the system’s falling to the ground or other damages. Lanner Electronics Inc. shall not be held liable for any losses resulting from insufficient strength for supporting the system or use of inappropriate installation components.

  • Page 7: Electrical Safety Instructions

    EAI-I133 User Manual Warning This equipment must be grounded. The power cord for product should be connected to a socket-outlet with Class I Equipment. This equipment must be earthed. The power plug must be connected to a properly wired earth ground socket outlet.

  • Page 8: Table Of Contents

    EAI-I133 User Manual Table of Contents Chapter 1: Product Overview ..............9 Package Content..........................9 Additional Accessories ........................9 Ordering Information ........................10 Specifications............................ 11 Front Panel ............................12 Rear Panel ............................13 Motherboard Information........................ 14 Internal Jumpers and Connector ...................... 15 Chapter 2: Hardware Setup ..............

  • Page 9: Chapter 1: Product Overview

    Tensor Cores, it delivers unparalleled computational capabilities. Designed with compact dimensions and cost- efficiency in mind, the EAI-I133 serves as an ideal choice for a wide range of commercial and light industrial applications, offering seamless integration into diverse operational landscapes.

  • Page 10: Ordering Information

    EAI-I133 User Manual Ordering Information Storage Default Port Expansion Power NVIDIA Jetson Orin NX EAI-I133A (100 TOPS) with 16GB LPDDR5 Memory NVIDIA Jetson Orin NX (70 EAI-I133B TOPS) with 8GB LPDDR5 1x M.2 B-Key for 1x M.2 M-Key 3x GbE RJ45 Port;...

  • Page 11: Specifications

    EAI-I133 User Manual Specifications SKU A: Jetson Orin NX, 8-core NVIDIA ARM® Cortex A78, 25W, 16GB SKU B: Jetson Orin NX, 6-core NVIDIA ARM® Cortex A78, 20W, 8GB CPU & Frequency SKU C: Jetson Orin Nano, 6-core NVIDIA ARM®Cortex A78, 15W, 8GB SKU D: Jetson Orin Nano, 6-core NVIDIA ARM®Cortex A78, 10W, 4GB...

  • Page 12: Front Panel

    EAI-I133 User Manual Front Panel Description SIM Card Cover 1x Nano SIM card slot Power Button 1x ON/OFF Power Button LED Indicators Storage/Power Status LED Indicators Display Port 1x HDMI Port USB Port 2x USB 3.0 Type A Port USB Port 2x USB 2.0 Type A Port...

  • Page 13: Rear Panel

    EAI-I133 User Manual Rear Panel Description Power Input +12Vdc Power Input Reset Button 1x Reset Button COM Port 2x DB9 RS-232 COM Ports LAN Port 3x 1GbE RJ45 LAN Port Antenna Hole 1x Antennas Hole...

  • Page 14: Motherboard Information

    EAI-I133 User Manual Motherboard Information Block Diagram The block diagram indicates how data flows among components on the motherboard.

  • Page 15: Internal Jumpers And Connector

    EAI-I133 User Manual Internal Jumpers and Connector The pin headers on the motherboard are often associated with important functions. With the shunt (Jumper) pushed down on the designated pins (the pin numbers are printed on the circuit board, surrounding the pin header), certain feature can be enabled or disable.
  • Page 16 EAI-I133 User Manual PW3101 Description DC_in 12V RSTBTN701 Description SYS_RST_N COM1 Description COM2 Description...
  • Page 17 EAI-I133 User Manual USBA12 Description VBUS USB2_DN USB2_DP USB3_RXN USB3_RXP USB3_TXN USB3_TXP VBUS USB2_DN USB2_DP USB3_RXN USB3_RXP USB3_TXN USB3_TXP USBA34 Description VBUS USB2_DN USB2_DP VBUS USB2_DN USB2_DP HDMI1 Description DATA2_P DATA2_N DATA1_P...
  • Page 18 EAI-I133 User Manual DATA1_N DATA0_P DATA0_N CLKP CLKN DDC CLK DDC DAT LED701 Description GREEN_LED_+ GREEN_LED_- YELLOW_LED_+ YELLOW_LED_- PSBTN701 Description PWR_BTN PWR_BTN RED_LED GREEN_LED JBAT401 Description VBAT...
  • Page 19 EAI-I133 User Manual J801 (1-2) or Open: Auto ON (2-3): Manual ON Description MCU_ACOK J802 1-2: Normal Use 2-3: ISP Mode Description MCU_ISP_MODE J803 Description JTAG_SWDIO JTAG_SWCLK CON801 Description UART_RX UART_TX J2201 OPT_PWR VBUS_SENSE PCIE_DIS Others EM9191/EM9291 Description OPT_VCC VBUS_SENSE...
  • Page 20 EAI-I133 User Manual J401 Open or (1-2): Normal Use (2-3): Force Recovery Mode Description FORCE_RECOVERY J402 Description UART_TXD UART_RXD USB1101 Description VBUS_SENSE USB2_DN USB2_DP USB1102 Description USB3_RXN USB3_RXP USB3_TXN USB3_TXP USB2_DN USB2_DP...
  • Page 21 EAI-I133 User Manual M2B2201 Description Description M2B2_P38 F_CARD_POWER_OFF_N (default:1V8) USB2_TXP USB2_TXN LATCH LATCH LATCH LATCH LATCH LATCH LATCH LATCH M2B_P20_PCIE_DIS M2B_P22_VBUS_SENSE M2B2_P24...
  • Page 22 EAI-I133 User Manual USB3_RXN SIM_DETECT (default:NC) SIM_RST RESET USB3_RXP M2B_P68 SIM_CLK SIM_DAT USB3_TXN SIM_VCC USB3_TXP SIM2201 Description DATA M2E2001 Description Description USB_DP PCIE_RXP USB_DN LED_WIFI_N PCIE_RXN PCIE_CLKP PCIE_CLKN SUSCLK_32KHz...
  • Page 23 EAI-I133 User Manual PCIE_RST LED_BT_N PCIE_CLKREQ_N BT_DIS PEWAKE WIFI_DIS LATCH LATCH LATCH LATCH LATCH LATCH LATCH LATCH PCIE_TXP PCIE_TXN M2M2102 Description Description PCIE_RXN0 PCIE_RXN3 PCIE_RXP0 PCIE_RXP3 PCIE_TXN0...
  • Page 24 EAI-I133 User Manual SATA_LED PCIE_TXN3 PCIE_TXP0 PCIE_RST PCIE_TXP3 PCIE_CLKREQ_N PCIE_CLKN PCIE_WAKE_N PCIE_RXN2 PCIE_CLKP PCIE_RXP2 LATCH LATCH PCIE_TXN2 LATCH LATCH PCIE_TXP2 LATCH LATCH LATCH LATCH PCIE_RXN1 PCIE_RXP1 PCIE_TXN1 PCIE_TXP1...

  • Page 25: Chapter 2: Hardware Setup

    EAI-I133 User Manual CHAPTER 2: HARDWARE SETUP To reduce the risk of personal injury, electric shock, or damage to the unit, please remove all power connections to completely shut down the device and wear ESD protection gloves when handling the installation steps.

  • Page 26: Installing M.2 Storage (Optional)

    EAI-I133 User Manual Installing M.2 Storage (Optional) The system supports one M.2 M-Key slot for additional storage. Default with NVMe 128G onboard. 1. Power off the system, and open the top chassis cover. 2. Locate the M.2 slot on the motherboard.

  • Page 27: Installing Wi-Fi Module (Optional)

    EAI-I133 User Manual Installing Wi-Fi Module (Optional) The system supports one M.2 E-key slot for a Wi-Fi module card, which requires two antennas. Please follow these steps to install the Wi-Fi module. The Wi-Fi Module Kit includes: 1x Wi-Fi Module Card...
  • Page 28 EAI-I133 User Manual 6. Next, thermal pad placement. Place the thermal pad on the bottom side of the top chassis cover. Install Wi-Fi Antennas Left Side Right Side 1. Locate the two (2) antenna hole placements (A1, A2). Locate the two (2) IPEX connectors on the Wi-Fi module card.
  • Page 29 EAI-I133 User Manual 4. Connect the cables to the IPEX connectors on the Wi-Fi module card. 5. Lastly, fasten the antennas onto the bulkhead located on the system's exterior.

  • Page 30: Installing Lte Module (Optional)

    EAI-I133 User Manual Installing LTE Module (Optional) The motherboard provides one M.2 3042/3050/3052 slot for LTE/5G expansion. LTE module requires two (2) antennas, and 5G module requires four (4) antennas. Therefore, only one LTE module or one 5G module can be installed.
  • Page 31 EAI-I133 User Manual 4. Align the notch of the LTE module card Socket Key with the socket key in the pin slot. 5. Position the LTE module card pins at a 30- degree angle and insert them into the Notch socket until the card is completely seated.
  • Page 32 EAI-I133 User Manual 2. From inside the chassis, insert the SMA Female Bulkhead through the Antenna SMA Female holes on the panel. Bulkhead 3. On the outside of the system, attach the Antenna Washer and Nut, and tighten the Nut Hole using an SMA Torque Wrench.

  • Page 33: Installing 5G Module (Optional)

    EAI-I133 User Manual Installing 5G Module (Optional) The motherboard provides one M.2 slot for 5G/LTE expansion. LTE module requires two (2) antennas, and 5G module requires four (4) antennas. Therefore, only one LTE module or one 5G module can be installed. Please follow the procedures for 5G module card expansion installation.
  • Page 34 EAI-I133 User Manual 6. Lastly, thermal pad placement. Place the thermal pad on the bottom side of the top chassis cover. Installing 5G Antennas Front Panel Right Side Rear Panel 1. Locate the four (4) antenna hole placements (A1, A2, A3, A4). Locate the four (4) IPEX connectors on the 5G module card.
  • Page 35 EAI-I133 User Manual 4. Connect the antenna cables to the IPEX connectors on the 5G module card. 5. Lastly, fasten the antennas onto the bulkhead located on the system's exterior.

  • Page 36: Installing Sim Cards (Optional)

    EAI-I133 User Manual Installing SIM Cards (Optional) The SIM slot on the side panel supports one Nano SIM card. The SIM socket supports the push-push mechanism, allowing inserting and ejecting the SIM card to be as easy as one push.

  • Page 37: Wall Mounting The System (Optional)

    EAI-I133 User Manual Wall Mounting the System (Optional) The system can be mounted on a flat surfaced wall. Please take the following into considerations when mounting the system onto the wall. Note: All pictures shown are for illustration purposes only, actual product may vary due to specific model or enhancement.
  • Page 38 EAI-I133 User Manual 3. Insert four (4) anchoring bolts into the holes. 4. Align the four mounting holes on the system’s brackets with the four anchoring bolts you just installed on the wall. 5. Drive four (4) long screws into the anchoring bolts...

  • Page 39: Chapter 3: Initial Setup And Peripheral Control

    EAI-I133 uses NVIDIA® JetPack 6.0.0 version. The latest version of the software installation package can be found on Lanner Developer Site page with a login account and password. For technical support or to register for a Lanner account, please contact your distributor...

  • Page 40: Appendix A: Led Indicator Explanations

    EAI-I133 User Manual APPENDIX A: LED INDICATOR EXPLANATIONS System Power / Storage Status COLOR LED ACTION DESCRIPTION Green Steady When system power ON POWER No power on Blinking indicates HDD activity Yellow Blinking (Include SATA/NVMe) STORAGE No data access or No power ON...

  • Page 41: Appendix B: Terms And Conditions

    EAI-I133 User Manual APPENDIX B: TERMS AND CONDITIONS Warranty Policy 1. All products are under warranty against defects in materials and workmanship for a period of one year from the date of purchase. 2. The buyer will bear the return freight charges for goods returned for repair within the warranty period;...

  • Page 42: Rma Service Request Form

    EAI-I133 User Manual RMA Service Request Form When requesting RMA service, please fill out the following form. Without this form enclosed, your RMA cannot be processed.

Table of Contents