Installing The Humapette Holder - Human HumaPette Smart-Line User Manual

InStAllIng the humApette holDer

15
3 INSTALLING THE HUMAPETTE HOLDER
For convenience and safety always keep the HumaPette verti-
cally in its own holder when not in use. When installing the
holder, please follow the instructions below:
1. Clean the shelf surface with ethanol.
2. Remove the protective paper from the adhesive tape.
3. Install the holder as shown in Figure 2 (make sure the hold-
er is pressed against the edge of the shelf).
4. Place the HumaPette in the holder as shown in Figure 3.
FIGURE 2
FIGURE 3