TRENDnet TEW-450APB User Manual page 11

AP Name: The name of the AP, which can be used to identify the Access Point
among the all the Access Points in the wireless network.
SSID: Service Set Identifier, which is a unique name shared among all clients
and nodes in a wireless network. The SSID must be identical for each clients
and nodes in the wireless network.
Channel: The channel that AP will operate in. You can select the channel range
of 1 to 11 for North America (FCC) domain and 1 to 13 for European (ETSI)
domain.
Extended Range: When you enable this function, AP will reduce data rate with
a long distance.
Authentication Type: The authentication type default is set to disable. There
are four options: Disable, WEP, WPA, and WPA2.
WEP Encryption:
Key Type: Open System or Shared Key; the Open System allows public
access to the router via wireless communications; the Shared Key requires
the user to set a WEP key to exchange data with other wireless clients that
have the same WEP key.
WEP Key: Select the WEP encryption key length of 64bits or 128bit.
Mode: Select the key mode in ASCII or HEX
9