TURN ON POWER SUPPLY
Quick power cycle can caused system corruption. When power on, be careful not to
shut down in about 5 seconds, because data is writing to the flash.
Step1
START UP & LOGIN
In order to configure the Wireless 11g AP, you must use your web browser
and manually input http://192.168.1.250 into the Address box and press Enter.
The Main Page will appear.
To start configure the Wireless 11g AP, you must login as "admin" in the
User Name box. And input password "admin" on the password section.
Once you have logged-in as administrator, it is a good idea to change the
administrator password to ensure a secure protection to the Wireless 11g AP.
The Security Settings section described later in this manual describes how to
change the password.
Once you have input the correct password and logged-in, the screen will
change to the Setup page screen.
2