TRENDnet TEW-410APB Quick Installation Manual page 3

AP Default Settings
The default settings are shown following.
User
Password
AP IP Address
AP Subnet Mask 255.255.255.0
RF ESSID
11g RF Channel 6
Mode
Encryption
Configure your Network Adapter's IP Address
To configure this Access Point (AP), please connect the unit to wired Ethernet
network (make sure the IP address 192.168.1.250 is not already in use) and
use a computer on the network to configure the AP. Or, connect (network) a
Computer with Ethernet adapter to the AP and then configure the AP. In either
case, please change the computer's network adapter's IP address to
192.168.1.X (where X = any number from 1 ~ 249) with subnet mask
255.255.255.0, and then use this computer to configure the AP.
To configure the network adapter's IP address, please go to "Network
Properties" (or "Local Area Connection" properties) and then go to "TCP/IP"
properties.
admin
admin
192.168.1.250
ap11g
11b+g
Disabled
1