TRENDnet TEW-410APB Quick Installation Manual page 7

SSID: The service set identifier ( SSID ) or network name. It is case sensitive
and must not exceed 32 characters, which may be any keyboard character.
You shall have selected the same SSID for all the APs that will be
communicating with mobile wireless stations.
Channel: Select the appropriate channel from the list provided to correspond
with your network settings. You shall assign a different channel for each AP to
avoid signal interference.
Security: To enable WEP (Wired Equivalent Privacy) or WPA (Wi-Fi
Protected Access), please click on "Enable" and then click on "Configure
Security".
Security Mode: Options are WEP, WPA Pre-Shared Key, and WPA RADIUS.
In this guide we will cover WEP setup, for WPA, please refer to the User's
Guide on the CD-ROM.
WEP: Make sure that all wireless devices on your network are using the same
encryption level and key. WEP keys must consist of the letters "A" through "F"
and the numbers "0" through "9."
Please Click "Apply" button to save your settings once you have any change.
5